Waterproofing Chemical

Approx. Rs 8,700 / LitreGet Latest Price

Product Details:

Foscro Nitocote SN522 Silicone Water Repellant is supplied as a colourless, ready to use, silicone resin solution which can be sprayed or brush applied onto the surface.

Fosroc offers a comprehensive range of high performance, high quality concrete repair and construction products. In addition, Fosroc offers technical support service to specifiers, end users and contractors, as well as on site technical assistance in locations all over the country.

Features:

• Store in Cool & Dry Place
• Stir Well Before Use

Approx. Rs 180 / LitreGet Latest Price

Product Details:

To minimise permeability and increase the waterproofing properties of concrete and cement sand mortars for critical applications like roof slabs and screeds, basements, external plastering, bathroom floors, water tanks, sumps, drains etc. 

Approx. Rs 350 / LitreGet Latest Price

Product Details:

Foscro Hydrproof Xtra Polymer Cement Waterproof Coating is formulated to be mixed with cement on site or simply brush applied over concrete or masonry surfaces to provide an effective waterproof membrane.

Approx. Rs 350 / KgGet Latest Price

Product Details:

Fosroc Renderoc Plug Waterproofing Chemicals is supplied as a ready to use blend of dry powders which requires only the addition of clean water at site to produce a highly consistent, rapid setting mortar which is easy to apply in many difficult conditions. The material is based on a blend of cements, graded aggregates, special fillers and chemical additives which control the rate of set and minimise the risk of thermal cracking.

Features:

• Store in Cool & Dry Place
• Covered Place

 

Approx. Rs 650 / KgGet Latest Price

Product Details:

Fosroc Renderoc RG Waterproofing Chemical is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a free-flowing non-shrink repair micro concrete. The material is based on Portland cements, graded aggregates and fillers, and additives which impart controlled expansion characteristics in the plastic state, while minimising water demand. The low water requirement ensures high early strength and long-term durability. For larger repairs, the mixed Renderoc RG may be modified by the addition of 5mm to 12mm clean, graded, saturated surface dry aggregates at site. For exceptionally large repairs, the local Fosroc office shall be consulted.

Features:

• Store in Cool & Dry Place

• Covered Place

Approx. Rs 230 / LitreGet Latest Price

Product Details:

Fosroc Reebol Emulsion Xtra Waterproofing Chemical is supplied as a pale amber liquid which turns white when diluted with water to produce a chemical release agent, combining the outstanding release properties of such materials with the economy of a conventional oil. It reacts with the alkali in the concrete to form a thin water repellent skin on the surface of the mould which enables easy stripping from the hardened concrete.


Features:

• Store in Cool & Dry Place
• Stir Well Before Use

Approx. Rs 400 / LitreGet Latest Price

Product Details:

Fosroc Nitobond SBR Waterproofing Chemicals is modified styrene butadiene rubber emulsion specially designed for use as a bonding aid and gauging liquid for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.

Features:

• Store in Cool & Dry Place

Product Price :Get Latest Price

Product Details:

Fosroc Brushbond RFX Powder  is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water.


Brushbond RFX is suitable for all types of structures including those in coastal environments.


The product can be used on concrete, brick and block work substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements and roofs. The product provides a tough durable water resistant coating which can withstand light pedestrian traffic and also has excellent weather resistance for exterior applications.

Product Price :Get Latest Price

Product Details:

Brushbond is an high performance elastomeric cementitious coating used for waterproofing and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water.

Brushbond is suitable for all types of structures including those in coastal environments.

The product can be used on concrete, brick and block work substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements and roofs. The product provides a tough durable water resistant coating which can withstand light pedestrian traffic and also has excellent weather resistance for exterior applications.

Product Price :Get Latest Price

Product Details:

We are offering Fosroc Brushbond RFX Liquid.

Product Price :Get Latest Price

Product Details:

Approx. Rs 525 / LitreGet Latest Price

Product Details:

B DRY Polyflex WP Waterproof Coating for concrete, stone and brickwork both internally and externally prevents seepage of Water, salts and pollutants, whilst still allowing the substrate to breathe. This product is specifically Designed for applications where crack bridging properties are required, to ensure continual waterproofing Even when the substrate beneath cracks and moves.